Konfigurasi Routing Cisco ( RIP )

TOPOLOGI

Setting ip address pada setiap Router sesuai Topologi
contoh pada router  0
Router>en

Router#conf te

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.1.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#int fa1/0

Router(config-if)#ip add 70.70.70.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#int fa0/1

Router(config-if)#ip add 30.30.30.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#int fa1/1

Router(config-if)#ip add 10.10.10.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

ROUTING RIP 

lakukan routing pada setiap router sesuai dengaan ip yang didaftarkan pada setiap router

Router>en

Router#conf te

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#rou

Router(config)#router ri

Router(config)#router rip

Router(config-router)#net

Router(config-router)#network 192.168.1.0

Router(config-router)#network 70.70.70.0

Router(config-router)#network 30.30.30.0

Router(config-router)#network 10.10.10.0

Router(config-router)#ex

Router(config)#do wr

Building configuration...

[OK]

Router(config)#

lanjutkan pada router 1-7 dengan cara yang sama,sesuai dengan ip yang didaftarkan

HASIL 

 

• Tweet
• Share
• Share
• Share
• Share

About Admin MC3

This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.

Related Post